Numerical simulation and analysis of the chamber process in a garbage furnace before and after reconstruction 造纸垃圾焚烧炉改造前后炉内过程数值模拟分析
Afterfiring zone Effects of Fuel Injection Timing and Combustion Chamber Geometry on Combustion Process and Emissions of Diesel Engine (带式烧结机的)后烧段喷油定时和燃烧室形状对柴油机燃烧及排放的影响
Simulation and Optimization of the Oxidation Reactor for Toluene Combustion Chamber Used in TiO_2 Chlorination Production Process 氯化法钛白氧化反应器甲苯燃烧室仿真模拟研究
Before the wide spread adoption of contact process, the chamber process was used. 在接触法普遍采用之前,使用铅室法。
Such as jet engine blades, its outside profile and cooling streamlined with inner chamber, with the machining process can hardly formation. 如喷气式发动机的叶片,其流线型外廓与冷却用内腔,用机械加工工艺几乎无法形成。
Ionization in a free-air chamber is the standard process for measuring x-and γ-ray exposure. 自由空气电离室中的电离作用是量度x和γ射线照射量的标准方法。
Effect of Combustion Chamber Geometry on Combustion Process in Spark Ignition Natural Gas Engine 燃烧室形状对天然气发动机燃烧过程影响的研究
This type of seal can achieve no-friction and good performance seal, hence it can meet the requirements of high vacuum without metal contaminate for the chamber in the wafer process. 这种密封能实现无摩擦、性能好的密封,能最大程度满足晶片处理过程中对靶室高真空度及金属颗粒的要求。
The device is distinguished by excellent polyurethane material, reasonable blood chamber shape, and advanced fabrication process. 这种装置的材料血液相容性优良,血室形态、结构设计合理,制作工艺和质量控制严格。
Influence of combustion chamber geometry and position on combustion process 燃烧室几何形状和位置对燃烧过程的影响
The Effect of Combustion Chamber Shape on the Mixing Process of an Impinging Gas Jet 燃烧室壁面形状对撞壁射流气体混合过程的影响
By means of increasing compress ratio and adopting a turbulent combustion chamber, the combustion process was improved. 通过采取增大压缩比、采用湍流型燃烧室的措施,可改善发动机的燃烧过程。
Numerical Simulation on the Effect of Combustion Chamber Geometry on Diesel Engine Combustion Process 燃烧室几何形状对柴油机燃烧过程影响的数值模拟研究
In this paper the influence of swirl chamber parameters on the diesel combustion process is analysed by mathematical model. Based on analysis, a new hot plug for swirl chamber is designed. 本文通过数学模型方法分析了涡流室参数对柴油机燃烧过程的影响,在此基础上设计了一种新型涡流室镶块结构。
Compared with other kinds of ramjet, the marked characteristic of the solid fuel ramjet is that its propellant combustion chamber process is not only concerned with the propellant composition, motor structure and combustion pressure, but also dependent on the air parameter in the combustion air inlet. 与其它冲压发动机相比,固体燃料冲压发动机一个显著特点是推进剂燃烧过程不仅与推进剂配方、发动机结构和燃烧室压强有关,还取决于燃烧室入口空气参数,因此工作过程较为复杂。
The passage dimension of separation chamber, the heating temperature of intake pipe air and the relevant influence of the ceramic heat insulation coating of combustion chamber upon the compressive ignition process of natural gas were studied by experiment. 实验研究了分隔室通道尺寸、进气管空气加热温度、燃烧室陶瓷隔热涂层对天然气压燃着火过程的相关影响。
Bubble Chamber Improvement of radiographic examination process for blank grooves of nozzle box 喷嘴室毛坯坡口区射线检测工艺的改进
We compared the hot water process with the steam chamber process and found that the latter has the advantages of cost reduction and high productivity. 本文主要对水煮加热方式和蒸汽加热方式进行比较,认为蒸汽加热方式具有经济性好,生产效率高等优点。
Application of Insulating Powder Coatings on the Bus-bar of High-voltage Switch Chamber by Fluidized Bed Coating Process 流化床涂覆在高压开关柜母线绝缘上的应用
Study of the ultrastructure in nerve regeneration chamber during nerve repair process 神经再生室中神经修复过程的超微结构研究
The chamber pressure is an important process parameter on freeze-drying. 冻干箱内压力是冻干过程中重要的工艺参数之一。
Flux distribution of coal gas spout and air spout in combustion chamber in lead column in process of zinc refining 锌精馏铅塔燃烧室煤气喷口和空气喷口流量分布
By utilizing an apparatus for measuring axial temperature of vortex tube, with the influence of inlet press and structure of vortex chamber on energy separation process considered, experimental studies on axial temperature for different inlet press and vortex chamber structures were made. 利用涡流管部分轴线温度测量实验装置,考虑到进气压力和涡流室结构对涡流管能量分离过程的影响,针对不同进气压力和不同涡流室结构的涡流管部分轴线温度分布进行了实验研究。
Objective To observe the ultrastructural changes of various cell components in a nerve regeneration chamber during its regenerating process. 目的研究神经再生室中周围神经修复过程各组成成份的变化过程。
When the magma is in the course of rising it should be hybridized a little by the crust substance, the magma rises from the source to emplacement at least experiences twice magma chamber fractional crystallization process. 岩浆在上升过程中受到过较低程度的地壳物质的混染,岩浆从源区上升到就位至少经历了两次岩浆房的分离结晶过程。
The setting of surge chamber, the transient process of different operation conditions and control strategy are all important factors affecting the safety operation of hydropower stations. 调压室的设置、水电站过渡过程及其控制策略均是影响水电站安全稳定运行的重要方面。
This book was divided into Treatise on Febrile Diseases and Synopsis of the Golden Chamber in the later process of spread. 该书在后世流传过程中被分为《伤寒论》和《金匮要略》两部分。
The dissertation is based on some theoretical researches and experimental investigations of electron beam process on flue gas desulphurization and denitration, of which electron beam transport, radiation chamber, by-product collection and process technology are included. 论文针对电子束脱硫工艺技术中的电子束输运、反应器、副产物收集、工艺等关键技术问题进行了理论分析和试验研究。
Designed the experimental procedure of oil-gas separation, effection of the membrance and chamber parameters on the oil-gas separation process is verified by experiment. The experimental results and theoretical analysis are comparable. 设计了油气分离实验流程,对薄膜和气室参数对油气分离过程的影响进行了实验验证,实验结果与理论分析具有可比性。
Therefore, the pursuit of objectives of this project is to analyze large presses high pressure chamber relief process, can be tolerated under the impact, so that the fastest relief process. 因此,本课题的追求目标是,对大型压机高压容腔的泄压过程进行分析,在可容忍的冲击下,使泄压过程最快。